{"id":2486,"date":"2024-05-30T16:43:10","date_gmt":"2024-05-30T13:43:10","guid":{"rendered":"http:\/\/filtresistemleri.com\/urun\/siklonlar-siklon-filtre\/"},"modified":"2026-11-10T04:38:16","modified_gmt":"2026-11-10T01:38:16","slug":"cyclone-filter","status":"publish","type":"product","link":"https:\/\/www.filtresistemleri.com\/en\/cyclone-filter\/","title":{"rendered":"Cyclones \/ Pre-Separator Cyclone Filter"},"content":{"rendered":"<h2>What Is a Cyclone Filter?<\/h2>\n<p>A cyclone filter is a mechanical separator that separates particles from the air by means of a rotating motion created inside the body. It contains no bag, cartridge or similar filtering element. The separation is done entirely by the geometry of the flow.<\/p>\n<p>In the industry, it is also called a cyclone, filter cyclone and cyclone dust separator, and all three describe the same equipment. The term cyclone dust separator is used in process applications where the separating function stands out. The term pre-separator cyclone describes cases where the unit operates in front of a bag or cartridge filter.<\/p>\n<p>The real strength of a cyclone shows with coarse and heavy particles. It works with high efficiency on dusts such as shavings, sand, slag and granules. With fine dust in the respirable size range it is not sufficient on its own, and a second filtration stage is needed behind it.<\/p>\n<h2>Operating Principle of the Cyclone Filter<\/h2>\n<p>Dusty air enters the body through a tangential inlet and forms a spiral that rotates downward along the cylindrical body and the cone. Because of their mass, the particles cannot follow this turn. They are thrown to the outer wall by centrifugal force and descend by sliding along the wall.<\/p>\n<p>The dust descending along the wall falls into the hopper below the cone. The cleaned air forms a second, upward spiral at the center of the body and leaves the system through the outlet pipe at the top. The proper formation of these two spirals determines the efficiency of the cyclone.<\/p>\n<p>Because there are no moving parts in the body, the cyclone is equipment with little exposure to failure and serves without stopping on lines that run continuously. The factors that spoil its efficiency usually come from outside: air leaking in below the cone, a hopper that has filled up, or a flow rate different from the design.<\/p>\n<h2>What Are the Types of Cyclone Filters?<\/h2>\n<p>Cyclones are classified by the number of bodies and their role in the line. The table below shows where three common configurations differ from one another.<\/p>\n<table>\n<thead>\n<tr>\n<th>Type<\/th>\n<th>Position in the line<\/th>\n<th>Key feature<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Pre-separator cyclone<\/td>\n<td>In front of the main filter<\/td>\n<td>Reduces the dust load reaching the filter and the consumable cost<\/td>\n<\/tr>\n<tr>\n<td>Single cyclone<\/td>\n<td>Standalone or at the end of the line<\/td>\n<td>Simplest structure and lowest maintenance<\/td>\n<\/tr>\n<tr>\n<td>Multi-cyclone<\/td>\n<td>On high-flow lines<\/td>\n<td>Higher efficiency on small particles<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>Pre-Separator Cyclones<\/h3>\n<p>A pre-separator cyclone is positioned immediately in front of a <a href=\"https:\/\/www.filtresistemleri.com\/en\/jet-pulse-bag-filter\/\">jet pulse bag filter<\/a> or <a href=\"https:\/\/www.filtresistemleri.com\/en\/jet-pulse-cartridge-filter\/\">jet pulse cartridge filter<\/a> unit. By retaining coarse and heavy particles here, it reduces the dust load reaching the main filter.<\/p>\n<p>The return for this is a longer replacement interval for bags and cartridges. Because the main unit is loaded less, the cleaning cycle becomes less frequent and compressed air consumption falls. With abrasive dust, the bags are protected from wear by coarse grains. In foundry and cement lines, this arrangement is the most commonly used.<\/p>\n<h3>Single cyclone filters<\/h3>\n<p>A single cyclone is the plainest solution, consisting of a single body. With coarse-grained dusts such as shavings, splinters and granules, it provides sufficient efficiency on its own. Because the collected material stays dry and clean, it is fed straight back into production in most plants. Since the body diameter is kept large, the risk of clogging also remains low.<\/p>\n<h3>Multi-cyclone filters<\/h3>\n<p>A multi-cyclone consists of many small-diameter cyclones placed in a common housing. As the diameter decreases, the rotation speed and centrifugal force increase, so finer particles are captured. It is preferred in high-flow cement and power plants. It creates a higher pressure loss than a single-body unit, and this difference is taken into account in fan selection.<\/p>\n<h2>Technical Specifications and Design of the Cyclone Filter<\/h2>\n<p>A cyclone is designed not by selection from a catalog but with the plant&#8217;s own data. The body dimensions are interdependent, and when one changes, the efficiency and pressure loss change as well. The table below summarizes the items that determine the design.<\/p>\n<table>\n<thead>\n<tr>\n<th>Design parameter<\/th>\n<th>What it affects<\/th>\n<th>Determining factor<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Air flow rate<\/td>\n<td>Body cross-section and inlet size<\/td>\n<td>Total requirement of the suction points<\/td>\n<\/tr>\n<tr>\n<td>Inlet velocity<\/td>\n<td>Intensity of rotation, wear and pressure loss<\/td>\n<td>Dust properties and accepted pressure loss<\/td>\n<\/tr>\n<tr>\n<td>Body diameter<\/td>\n<td>Smallest particle that can be captured<\/td>\n<td>Particle size and density<\/td>\n<\/tr>\n<tr>\n<td>Cone angle and length<\/td>\n<td>Descent of the dust to the hopper<\/td>\n<td>Flowability of the dust and its tendency to stick<\/td>\n<\/tr>\n<tr>\n<td>Outlet pipe<\/td>\n<td>Prevention of short-circuit flow<\/td>\n<td>Calculated together with the body dimensions<\/td>\n<\/tr>\n<tr>\n<td>Material and wear plate<\/td>\n<td>Body life<\/td>\n<td>Abrasiveness of the dust and temperature<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>Air Flow Rate and Inlet Velocity<\/h3>\n<p>The first input of the design is the hourly air flow rate. This value comes from the total of the suction points and directly determines the body cross-section. The tangential inlet velocity is just as decisive. When the velocity stays low, the rotation is not strong enough and particles are carried to the outlet with the air. An excessively high velocity increases the pressure loss and wall wear.<\/p>\n<h3>Particle Size and Dust Density<\/h3>\n<p>The smallest particle a cyclone can capture depends on the body diameter and the density of the dust. Heavy particles are thrown outward more easily, so they are captured with higher efficiency in the same body. With light, fine dust, either the body diameter is reduced or a second stage is added behind it. Sample analysis makes this decision on the basis of data rather than guesswork.<\/p>\n<h3>Sizing and Pressure Loss<\/h3>\n<p>As the diameter decreases, efficiency rises but so does the pressure loss. The cyclone calculation is carried out to find the balance between these two values that the plant can accept. The result becomes an input to the industrial fan selection.<\/p>\n<h2>Advantages and Limits of the Cyclone Filter<\/h2>\n<p>Thanks to its plain structure, the cyclone saves on both the investment and the operating side. Its strong points are as follows:<\/p>\n<ul>\n<li><strong>No consumables:<\/strong> There are no bags or cartridges to replace.<\/li>\n<li><strong>Little exposure to failure:<\/strong> There are no moving parts inside the body.<\/li>\n<li><strong>Suitable for hot gas:<\/strong> There is no filter fabric limit; the limit is set by the body material.<\/li>\n<li><strong>Recovery:<\/strong> The captured material stays clean and dry, so it can be reused.<\/li>\n<li><strong>Long life:<\/strong> When the wear plate is renewed, the body works for many years.<\/li>\n<\/ul>\n<p>Its limit is fine dust. A cyclone does not capture all particles in the respirable size range and, in most plants, cannot meet the stack emission limit on its own. For this reason, on lines carrying fine dust the cyclone remains a preliminary stage, and the actual capture is done by a bag or cartridge filter. Possible build-up on the inner surface of the body with sticky and humid dust is also evaluated from the start.<\/p>\n<h2>What Should Be Considered When Selecting a Cyclone Filter?<\/h2>\n<p>The starting point of selection is the dust sample. Without knowing the particle distribution, the body diameter that will be sufficient is determined by guesswork, and this may not deliver the efficiency expected in the field.<\/p>\n<ul>\n<li><strong>Role of the cyclone:<\/strong> A standalone unit and a pre-separator to be placed in front of the main filter are sized by different criteria.<\/li>\n<li><strong>Abrasiveness:<\/strong> With sand, slag and mineral dust, a wear plate is fitted at the inlet and the cone.<\/li>\n<li><strong>Temperature and humidity:<\/strong> They determine the body material and the need for insulation. With humid dust, the risk of sticking is evaluated.<\/li>\n<li><strong>Sparks:<\/strong> With dust carrying sparks from grinding and metalworking, the cyclone keeps sparks away from the dry filter. If sparks are heavy, a comparison is made with a <a href=\"https:\/\/www.filtresistemleri.com\/en\/water-filter\/\">water filter<\/a>.<\/li>\n<li><strong>Discharge:<\/strong> The <a href=\"https:\/\/www.filtresistemleri.com\/en\/air-lock-rotary-valve\/\">air lock rotary valve<\/a> under the hopper both discharges the dust and prevents leakage air from entering below the cone.<\/li>\n<\/ul>\n<h2>Manufacturing and Engineering Process of the Cyclone Filter<\/h2>\n<p>The process starts with measurement at the plant. The suction points, operating temperature and dust sample are taken to establish the real requirement of the line. If an addition is to be made to an existing line, the duct route and the flow rate and pressure data of the existing fan are also recorded at this stage.<\/p>\n<p>In the second stage, the sizing and technical drawing are prepared, and the body sheet thickness and the material of the surfaces exposed to wear are determined here. After approval, the cyclone is manufactured in the FLTS workshop. The weld seams are checked for tightness, because even a small leak in the body disturbs the internal flow. The unit is shipped to site ready for installation.<\/p>\n<h2>Maintenance and Inspection of Cyclone Filters<\/h2>\n<p>The maintenance load of a cyclone is low, but if neglected, its efficiency drops quickly. The regular checklist consists of the following items:<\/p>\n<ul>\n<li>Emptying the dust hopper before it fills, and operation of the rotary valve<\/li>\n<li>Whether there is leakage air below the cone and at the flanges<\/li>\n<li>Wear at the inlet and on the inner surface of the cone<\/li>\n<li>Pressure difference between the body inlet and outlet<\/li>\n<\/ul>\n<p>A hopper that has filled up or a clogged rotary valve stops the separation process directly. Leakage air entering below the cone disturbs the upward flow and mixes the captured dust back into the air. When these checks are not skipped, the cyclone works at its design efficiency for many years.<\/p>\n<h2>Factors Determining Cyclone Filter Prices<\/h2>\n<p>Cyclone filter prices are determined per project and are not given from a ready price list. Flow rate, body diameter, sheet thickness, material type and the use of a wear plate are the main items that make up the price. The discharge arrangement under the hopper, conveying equipment such as a <a href=\"https:\/\/www.filtresistemleri.com\/en\/screw-conveyor\/\">screw conveyor<\/a>, on-site installation and duct connection are evaluated separately.<\/p>\n<p>A multi-cyclone configuration costs more than a single-body unit; in return, the efficiency it provides on fine particles lowers the consumable cost of the main filter. In the evaluation, not only the initial investment but also the bag life and compressed air savings that the cyclone gives the main filter are taken into account.<\/p>\n<h2>Frequently Asked Questions About Cyclone Filters<\/h2>\n<h3>For which particles is a cyclone filter effective?<\/h3>\n<p>It provides high efficiency on coarse and heavy particles. With light and very fine dust it is not sufficient on its own, and a second filtration stage is needed behind it.<\/p>\n<h3>What is the difference between a multi-cyclone and a single cyclone?<\/h3>\n<p>A multi-cyclone consists of many small-diameter bodies, so it captures finer particles. A single cyclone is simpler and has a lower pressure loss, and is preferred for coarse dust.<\/p>\n<h3>Is a cyclone filter sufficient on its own?<\/h3>\n<p>It is sufficient for coarse-grained dusts such as shavings and granules. If respirable fine dust is involved, the cyclone remains a preliminary stage and the actual capture is done by a bag or cartridge unit.<\/p>\n<h3>What factors affect cyclone filter efficiency?<\/h3>\n<p>Efficiency is determined by the body diameter, inlet velocity, particle size and dust density. Leakage air entering the system and a dust hopper left full also lower the efficiency quickly.<\/p>\n<h3>Why is pressure loss important in cyclone filters?<\/h3>\n<p>Pressure loss directly determines the energy consumed by the fan. If the value is selected higher than necessary, the electricity cost rises; if it stays low, the separation efficiency does not reach the desired level.<\/p>\n<h3>Can a cyclone be used with hot gas?<\/h3>\n<p>Yes. Because a cyclone has no filter fabric, the temperature limit is set by the body material. For hot gas, the body material and, if necessary, insulation are selected accordingly.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>What Is a Cyclone Filter? A cyclone filter is a mechanical separator that separates particles from the air by means of a rotating motion created inside<span class=\"excerpt-hellip\"> [\u2026]<\/span><\/p>\n","protected":false},"featured_media":1946,"template":"","meta":[],"product_brand":[],"product_cat":[129],"product_tag":[],"class_list":["post-2486","product","type-product","status-publish","has-post-thumbnail","product_cat-dust-collection-systems","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/www.filtresistemleri.com\/en\/wp-json\/wp\/v2\/product\/2486","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.filtresistemleri.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.filtresistemleri.com\/en\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.filtresistemleri.com\/en\/wp-json\/wp\/v2\/media\/1946"}],"wp:attachment":[{"href":"https:\/\/www.filtresistemleri.com\/en\/wp-json\/wp\/v2\/media?parent=2486"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.filtresistemleri.com\/en\/wp-json\/wp\/v2\/product_brand?post=2486"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.filtresistemleri.com\/en\/wp-json\/wp\/v2\/product_cat?post=2486"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.filtresistemleri.com\/en\/wp-json\/wp\/v2\/product_tag?post=2486"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}